MG-2Y Inch Bushings Specication & Tolerance MG-2Y Inch Bushings Specication & Tolerance

◆ Introduction:

MG-2Y can work for a long time without oil in the condition of prelubricated with lubrication indents design. It is widely applied in metallurgy machinery, mining machinery, water conservancy machinery, automobile, building machinery, agriculture machinery, rolling steel industry etc.


◆ Material Structure

1. POM with fiber 0.3~0.5mm

2. Porous bronze 0.2~0.35mm

3. Steel backing 0.4~2.2mm

4. Plated coating: Tin plating 0.005mm or Copper plating 0.008mm

5.材料.png


Technical Data

Technical Data
Max.loadStatic250N/mm2
Very low speed140N/mm
Roatating oscillating 70N/mm
Max. PV (dry running)3N/mm ·m/s
Temp. limit -40~+110
Friction coenncient 0.05~0.20
Max. speedGrease Lubrication: 2m/s
Oil continued to  >2m/s
Thermal conductivity 50 W(m·k)-1
Coenncient of thermal expansion 11×10 ·K
Initial pre-lubrication at assembly is strongly  recommended


Download Catalog

>>
<<
SelectInquiryPart NoInternal Diameter(in)External Diameter(in)Length L ±0.01Wall Thickness SOil Hole-Φ (H)
dShaft-Φd SΦdiDHousing-ΦD H
06MG06 3/8 0.3648 0.3639 0.3694 0.3667 15/32 0.4694 0.4687 0.375 0.0510 0.0500 5/32
06MG08 3/8 0.3648 0.3639 0.3694 0.3667 15/32 0.4694 0.4687 0.5 0.0510 0.0500 5/32
06MG12 3/8 0.3648 0.3639 0.3694 0.3667 15/32 0.4694 0.4687 0.75 0.0510 0.0500 5/32
07MG08 7/16 0.4273 0.4263 0.4319 0.4292 17/32 0.5319 0.5312 0.5 0.0510 0.0500 5/32
07MG12 7/16 0.4273 0.4263 0.4319 0.4292 17/32 0.5319 0.5312 0.75 0.0510 0.0500 5/32
08MG06 1/2 0.4897 0.4887 0.4944 0.4917 19/32 0.5944 0.5937 0.375 0.0510 0.0500 5/32
08MG08 1/2 0.4897 0.4887 0.4944 0.4917 19/32 0.5944 0.5937 0.5 0.0510 0.0500 5/32
08MG10 1/2 0.4897 0.4887 0.4944 0.4917 19/32 0.5944 0.5937 0.625 0.0510 0.0500 5/32
08MG14 1/2 0.4897 0.4887 0.4944 0.4917 19/32 0.5944 0.5937 0.875 0.0510 0.0500 5/32
09MG08 9/16 0.5522 0.5512 0.5569 0.5542 21/32 0.6569 0.6562 0.5 0.0510 0.0500 5/32
09MG12 9/16 0.5522 0.5512 0.5569 0.5542 21/32 0.6569 0.6562 0.75 0.0510 0.0500 5/32
10MG08 5/8 0.6146 0.6136 0.6195 0.6167 23/32 0.7195 0.7187 0.5 0.0510 0.0500 5/32
10MG10 5/8 0.6146 0.6136 0.6195 0.6167 23/32 0.7195 0.7187 0.625 0.0510 0.0500 5/32
10MG12 5/8 0.6146 0.6136 0.6195 0.6167 23/32 0.7195 0.7187 0.75 0.0510 0.0500 5/32
10MG14 5/8 0.6146 0.6136 0.6195 0.6167 23/32 0.7195 0.7187 0.875 0.0510 0.0500 5/32
12MG08 3/4 0.7390 0.7378 0.7444 0.7412 7/8 0.8758 0.8750 0.5 0.0669 0.0657 5/32
12MG12 3/4 0.7390 0.7378 0.7444 0.7412 7/8 0.8758 0.8750 0.75 0.0669 0.0657 5/32
12MG16 3/4 0.7390 0.7378 0.7444 0.7412 7/8 0.8758 0.8750 1 0.0669 0.0657 5/32
14MG12 7/8 0.8639 0.8627 0.8694 0.8662 1 1.0008 1.0000 0.75 0.0669 0.0657 1/4
14MG14 7/8 0.8639 0.8627 0.8694 0.8662 1 1.0008 1.0000 0.755 0.0669 0.0657 1/4
Previous1234Next
>>
<<

1. Good load capacity and anti-wear.

2. It is used in high load capacities and low speed with rotating, oscillating or frequent stop-start motion.

3. It can work for a long time without oil in the condition of boundary lubrication, but to oil or grease lubrication periodically, the working life span will become longer.

4. It is machinable for the thicker layer of POM.

5. The bushes can be applied  in auto chassis, forging machines, metallurgicals, civil engineerings, power stations, strip rolling industries etc.

6. MG-2Y is widely used in the machine where lead is unacceptable.

Application

MARGINAL BEARING Sliding bearing solutions for your applications

Search for keywords or any product numbers from other manufacturers and find the suitable product immediately. Optionally you can limit the search results by defining the product features.